Large Taper Wire Cut EDM Machine

Product Detail

LARGE TAPER WIRE EDM MACHINE 

Our large taper wire cut edm machine have the optional of +/-15°, +/-30°. It has four axis linkage of X,Y,U,V.  

Due to the special angle cutting device, it can do the fantastic job. 



Large taper wire cut edm job is always the trouble for many person, especially the working piece is thick. The following measure is should be taken into consideration during working and programming. 

1.Increase the tension of the wire. 

2.Using special large diameter molybdenum wire.

3.Using special water jet board, which have reasonable design for water flow. 

Further more, the scrap cleaning is difficult when cutting large angle, so it is necessary to reduce the machine power, increase discharge interval, reduce the height of Z axis. 



Machine Parameter 

Model	DK 7740Z	DK 7746Z	DK 7750Z	DK 7755Z	DK 7763Z
Dimension of working table (mm)	770x430	880x530	880x530	1070x600	1240x660
Travel of working table (mm)	400x500	460x630	500x630	450x800	630x1000
Maximum cutting  thickness (mm)	400	460	500	550	650
Machining taper	30°  45°	30°  45°	30°  45°	30°  45°	30°  45°
Maximum load weight	350kg	450kg	500kg	800kg	1000kg
Host weight	1300kg	1500kg	1600kg	1800kg	2500kg
Overall dimensions (mm)	1700x1400x1700	1800×1650×1800	1800×1650×1800	1900×2150×2100	2000×2200×2100